000217

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Member
Posts: 6
Joined: Wed Nov 01, 2017 12:27 pm
Location: UK

000217

Postby bilstonbiker » Mon Mar 05, 2018 12:14 pm

does anyone know if this nut will fit a 3/8 cylinder stud on a 67 csr thanks in advance Ken

Committee
User avatar
Posts: 8882
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: 000217

Postby Rob Harknett » Mon Mar 05, 2018 1:08 pm

Well it is a 3/8" 26 TPI double hex cylinder base nut. You will need to check your parts list to make sure it is correct for your bike. This part has been in use since the pre war era when it was old pt. no. STD 217

Committee
User avatar
Posts: 1214
Joined: Tue Jul 27, 2004 12:00 am
Location: BEDFORDSHIRE UK

Re: 000217

Postby Stuoyb » Mon Mar 05, 2018 2:00 pm

According to the parts list, 000217 was used from 1964 0n twins.

Member
Posts: 6
Joined: Wed Nov 01, 2017 12:27 pm
Location: UK

Re: 000217

Postby bilstonbiker » Mon Mar 05, 2018 4:17 pm

thanks for the replies just ordered a few more bits off club shop thanks again KEN

Return to G12 / AJS Model 31

Who is online

Users browsing this forum: No registered users and 7 guests